Search
× Search

 

FREQUENCY DIVIDERS

 

Holzworth frequency dividers exhibit the lowest additive phase noise available in the industry.


The HX4210 was designed as a reference output translator for Holzworth's early RF Synthesizer designs. The key design requirement was to maintain the low phase noise /jitter characteristics the 100MHz calibrated reference output signal so that it could be utilized as a 10MHz laboratory reference standard. The HX4210 and custom variations have been adopted by communications systems integrators since 2007.


For a product quotation, please contact the Holzworth Sales Department.

     
HX4210  

HX4920

The Holzworth HX4920 Frequency Divider is a digital divide-by-4 architecture covering input signals of 4GHz to 24GHz while maintaining signal integrity. The HX4920 also incorporates a low phase noise amplification circuit to maintain the phase noise of an RF signal at useable power levels. Originally designed to extend the phase noise measurement capability of the HA7062C Phase Noise Analyzer, the HX4920 exhibits a typical residual (additive) phase noise floor of -136dBc/Hz at 10GHz, 10kHz offset.

 

     
HX4210  

HX4210

The Holzworth HX4210 100MHz 10x Frequency Divider is a high grade laboratory accessory. An emphasis was placed on maintaining the low jitter and phase noise of an external reference or frequency source to maintain the integrity of system timing and noise.

 

WARRANTY

Holzworth frequency divider products are warranted for 1 year against manufacturing defects. All product repairs and maintenance must be performed by Holzworth Instrumentation. Holzworth reserves the right to invalidate the warranty for any products that have been tampered with or used improperly. Refer to the Holzworth Terms & Conditions of Sales for further details.


Please contact Holzworth for pricing estimates on non-warranty repairs.

 

Connect

2540 Frontier Ave., STE 200
Boulder, CO 80301-2400
United States

Phone: +1.303.325.3473
Fax: +1.866.259.1374

Email: sales@holzworth.com​

Contact Us

Back To Top